فتومتر رومیزی HI83300

توضیحات

فتومتر رومیزی HI83300 به همراه PH متر

فتومتر رومیزی HI83300 : فتومتر HI83300 دستگاهی مولتی پارامتر ساخت HANNA آمریکا جهت سنجش بسیاری از پارامترها و عناصر موجود در آب و خاک جهت استفاده در آزمایشگاه یا فضای بیرون از آن می باشد. دستگاه HI83300 به روش فتومتری یا همان نوری کار می کند .طراحی نوری آن مجهز به یک شاخص مرجع و لنز های متمرکز جهت پیشگیری از خطاهای ناشی از تغییر در منبع نور و نقص های موجود در شیشه ی کووت می باشد. دستگاه HI83300 امکان اندازه گیری 37 پارامتر موجود در آب و خاک ( از آلومینیوم تا روی ) را با 60 روش مختلف دارد. دستگاه فتومتر HI83300 علاوه بر اندازه گیری 37 پارامتر موجود در آب یا خاک ، امکان اندازه گیری pH و دما را نیز دارد. الکترود pH که به دستگاه HI83300 متصل می شود از نوع دیجیتالی است و امکان ذخیره نتایج حاصل از کالیبراسیون را دارد. نتایج حاصل از تست توسط دستگاه فتومتر HI83300 به وسیله دو خروجی USB تعبیه شده به کامپیوتر یا فلش منتقل می گردد. نمایشگر دستگاه از نوع گرافیکی می باشد و به دلیل داشتن نور پس زمینه امکان خواندن اطلاعات را در هر مکانی و با هر نور محیطی برای کاربر فراهم می سازد.

فتومتر HI83300 مولتی پارامتر مختص صنایع خاک و آب

این فتومتر دارای سیستم نوری پیشرفته ای است که از چند LED، فیلتر های تداخلی با باند های باریک، لنز های متمرکز، یک تشخیص دهنده ی سیلیکونی برای اندازه گیری جذب و یک تشخیص دهنده ی مرجع برای ثابت نگه داشتن منع نور جهت اطمینان از نتایج دقیق و تکرارپذیر فتومتری استفاده می کند.
دستگاه HI83300 دارای حالت اندازه گیری جذب می باشد که امکان تست استاندارد CAL Check را به منظور تایید عملکرد سیستم دستگاه به کاربران می دهد. حالت جذب به کاربران اجازه ی انتخاب از میان پنج طول موج مختلف (420 نانومتر، 466 نانومتر، 575 نانومتر و 610 نانومتر) را می دهد. دستگاه HI83300 دارای ویژگی GLP می باشد بدین منظور که اطلاعات کالیبراسیون شامل زمان ، بافرهای کالیبراسیون ، تاریخ ، انحراف و شیب اندازه گیری شده توسط دستگاه قابل ردیابی می باشد. دستگاه دارای سیستم هشدار اتوماتیک می باشد بدین معنی که در حین تست در صورت بروز هرگونه مشکل شرایط را به کاربر هشدار می دهد. دستگاه امکان ذخیره 1000 دیتا را در حافظه خود دارد که به آسانی با فشردن کلید LOG قابل بازخوانی هستند.

گزینه های روی صفحه فتومتر HI83300 :

انتخاب روش

کاربران می توانند روش مورد نظر خود را از بین هریک از پانزده روش اندازه گیری با استفاده از حالت اندازه گیری pH  فشردن کلید METHOD انتخاب کنند.
ذخیره اطلاعات
امکان ذخیره و بازیابی 1000 اندازه گیری به همراه مشخصات (ID) نمونه وجود دارد.
حالت اندازه گیری pH

با انتخاب حالت اندازه گیری pH امکان استفاده از فتومتر به عنوان یک pH متر حرفه ای با ویژگی های بسیاری مانند اندازه گیری های تصحیح دما، کالیبراسیون اتوماتیک دو نقطه ای و GLP وجود دارد. 

سیستم نوری پیشرفته
دستگاه HI83300 با یک سیستم نوری خلاقانه طراحی شده است که با یک BEAM SPILITTER ترکیب می شود تا نور را بتوان برای نتایج جذب و شاخص مرجع استفاده کرد. شاخص مرجع بر شدت نور نظارت دارد و آن را در هنگامی که رانشی ناشی از قدرت نوسان ایجاد می شود یا هنگام گرم شدن اجزا نوری، مدل می کند. هر بخش، نقش مهمی در ایجاد عملکرد بی نظیر فوتومتر دارد. 

پارامترها:
لطفا توجه فرمایید که کاربر می تواند ریجنت ها را به صورت جداگانه متناسب با نیاز خود تهیه کند.

Parameter Range Resolution Accuracy
 (at 25 °C)
Method Wavelength Reagent Code
Absorbance 0.000 to 4.000 Abs 0.001 Abs +/-0.003Abs @ 1.000 Abs
Alkalinity 0 to 500 mg/L (as CaCO3 ) 1 mg/L ±5 mg/L ±5% of reading Colorimetric Method 610 nm HI775-26
Alkalinity, Marine 0 to 300 mg/L (as CaCO3 ) 1 mg/L ±5 mg/L ±5% of reading Colorimetric Method 610 nm HI755-26
Aluminum 0.00 to 1.00 mg/L (as Al3+) 0.01 mg/L ±0.04 mg/L ±4% of reading Adaptation of the aluminon method. 525 nm HI93712-01
Ammonia, Low Range 0.00 to 3.00 mg/L (as NH3 -N) 0.01 mg/L ±0.04 mg/L ±4% of reading Adaptation of the ASTM Manual of Water and Environmental Technology, D1426 Nessler method. 420 nm HI93700-01
Ammonia, Medium Range 0.00 to10.00 mg/L (as NH3 -N) 0.01 mg/L ±0.05 mg/L ±5% of reading Adaptation of the ASTM Manual of Water and Environmental Technology, D1426, Nessler method 420 nm HI93715-01
Ammonia, High Range 0.0 to 100.0 mg/L (as NH3 -N) 0.1 mg/L ±0.5 mg/L ±5% of reading Adaptation of the ASTM Manual of Water and Environmental Technology, D1426, Nessler method 420 nm HI93733-01
Bromine 0.00 to 8.00 mg/L (as Br2 ) 0.01 mg/L ±0.08 mg/L ±3% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, DPD method 525 nm HI93716-01
Calcium 0 to 400 mg/L (as Ca2+) 1 mg/L ±10 mg/L ±5% of reading Adaptation of the Oxalate method 466nm HI937521-01
Calclium, Marine 200 to 600 mg/L (as Ca2+) 1 mg/L ±6% of reading Adaptation of the Zincon method 610 nm HI758-26
Chloride 0.0 to 20.0 mg/L (as Cl) 0.1 mg/L ±0.5 mg/L ±6% of reading Adaptation of the mercury(II) thiocyanate method 466 nm HI93753-01
Chlorine Dioxide 0.00 to 2.00 mg/L (as ClO2 ) 0.01 mg/L ±0.10 mg/L ±5% of reading Adaptation of the Chlorophenol Red method 575 nm HI93738-01
Chlorine, Free 0.00 to 5.00 mg/L (as Cl2 ) 0.01 mg/L ±0.03 mg/L ±3% of reading Adaptation of the EPA DPD method 330.5 525 nm HI93701-01
Chlorine, Free Ultra Low Range 0.000 to 0.500 mg/L (as Cl2 ) 0.001 mg/ ±0.020 mg/L ±3% of reading Adaptation of the Standard Method 4500-Cl G 525 nm HI95762-01
Chlorine, Total 0.00 to 5.00 mg/L (as Cl2 ) 0.01 mg/L ±0.03 mg/L ±3% of reading Adaptation of the EPA DPD method 330.5 525 nm HI93711-01
Chlorine, Total Ultra Low Range 0.000 to 0.500 mg/L (as Cl2 ) 0.001 mg/L ±0.020 mg/L ±3% of reading Adaptation of the EPA recommended Method 330.5 525 nm HI95761-01
Chlorine, Total Ultra High Range 0 to 500 mg/L (as Cl2 ) 1 mg/L ±3 mg/L ±3% of reading Adaptation of the Standard Methods for Examination of Water and Wastewater, 20th edition, 4500-Cl 525 nm HI95771-01
Chromium (VI), Low Range 0 to 300 µg/L (as Cr(VI)) 1 µg/L ±10 µg/L ±4% of reading Adaptation of the ASTM Manual of Water and Environmental Technology, D1687 Diphenylcarbohydrazide method 525 nm HI93749-01
Chromium (VI), High Range 0 to 1000 µg/L (as Cr(VI)) 1 µg/L ±5 µg/L ±4% of reading at 25 °C Adaptation of the ASTM Manual of Water and Environmental Technology, D1687, Diphenylcarbohydrazide method 525 nm HI93723-01
Color of Water 0 to 500 PCU (Platinum Cobalt Units) 1 PCU ±10 PCU ±5% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Colorimetric Platinum Cobalt method 420 nm
Copper, Low Range 0.000 to 1.500 mg/L (as Cu) 0.001 mg/L ±0.010 mg/L ±5% of reading Adaptation of the EPA method 575 nm HI95747-01
Copper, High Range 0.00 to 5.00 mg/L (as Cu) 0.01 mg/L ±0.02 mg/L ±4% of reading Adaptation of the EPA method 575 nm HI93702-01
Cyanuric Acid 0 to 80 mg/L (as CYA) 1 mg/L ±1 mg/L ±15% of reading Adaptation of the turbidimetric method 525 nm HI93722-01
Fluoride, Low Range 0.00 to 2.00 mg/L (as F) 0.01 mg/L ±0.03 mg/L ±3% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, SPADNS method 575 nm HI93729-01
Fluoride, High Range 0.0 to 20.0 mg/L (as F) 0.1 mg/L ±0.5 mg/L ±3% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, SPADNS method 575 nm HI93739-01
Hardness, Calcium 0.00 to 2.70 mg/L (as CaCO3 ) 0.01 mg/L ±0.11 mg/L ±5% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Calmagite method 525 nm HI93720-01
Hardness, Magensium 0.00 to 2.00 mg/L (CaCO3 ) 0.01 mg/L ±0.11 mg/L ±5% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, EDTA Colorimetric method 525 nm HI93719-01
Hardness, Total Low Range 0 to 250 mg/L (as CaCO3 ) 1 mg/L ±5 mg/L ±4% of reading Adaptation of the EPA recommended method 130.1 466 nm HI93735-00
Hardness, Total Medium Range 200 to 500 mg/L (as CaCO3 ) 1 mg/L ±7 mg/L ±3% of reading Adaptation of the EPA recommended method 130.1 466 nm HI93735-01
Hardness, Total High Range 400 to 750 mg/L (as CaCO3 ) 1 mg/L ±10 mg/L ±2% of reading Adaptation of the EPA recommended method 130.1 466 nm HI93735-02
Hydrazine 0 to 400 µg/L (as N2H4 ) 1 µg/L ±4% of full scale reading Adaptation of the ASTM Manual of Water and Environmental Technology, method D1385, p-Dimethylaminobenzaldehyde method 466 nm HI93704-01
Iodine 0.0 to 12.5 mg/L (as I2) 0.1 mg/L ±0.1 mg/L ±5% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, DPD method 525 nm HI93718-01
Iron, Low Range 0.000 to 1.600 mg/L (as Fe) 0.001 mg/L ±0.010 mg/L ±8% of reading Adaptation of the TPTZ Method 575 nm HI93746-01
Iron, High Range 0.00 to 5.00 mg/L (as Fe) 0.01 mg/L ±0.04 mg/L ±2% of reading Adaptation of the EPA Phenanthroline method 315B, for natural and treated waters 525 nm HI93721-01
Magnesium 0 to 150 mg/L (as Mg2+) 1 mg/L ±5 mg/L ±3% of reading Adaptation of the Calmagite method 466 nm HI937520-01
Manganese, Low Range 0 to 300 µg/L (as Mn) 1 µg/L ±10 µg/L ±3% of reading Adaptation of the PAN Method 575 nm HI93748-01
Manganese, High Range 0.0 to 20.0 mg/L (as Mn) 0.1 mg/L ±0.2 mg/L ±3% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Periodate method 525 nm HI93709-01
Molybdenum 0.0 to 40.0 mg/L (as Mo6+) 0.1 mg/L ±0.3 mg/L ±5% of reading Adaptation of the mercaptoacetic acid method 420 nm HI93730-01
Nickel, Low Range 0.000 to 1.000 mg/L (as Ni) 0.001 mg/L ±0.010 mg/L ±7% of reading Adaptation of the PAN method 575 nm HI93740-01
Nickel, High Range 0.00 to 7.00 g/L (as Ni) 0.01 g/L ±0.07g/L ±4% of reading Adaptation of the photometric method 575 nm HI93726-01
Nitrate 0.0 to 30.0 mg/L (as NO3 – N) 0.1 mg/L ±0.5 mg/L ±10% of reading Adaptation of the cadmium reduction method 525 nm HI93728-01
Nitrite, Marine Ultra Low Range 0 to 200 µg/L (as N02-N) 1 µg/L ±10 µg/L ±4% of reading Adaptation of the EPA Diazotization method 354.1 466 nm HI764-25
Nitrie, Low Range 0 to 600 µg/L (as NO2-N) 1 µg/L ±20 µg/L ±4% of reading Adaptation of the EPA Diazotization method 354.1 466 nm HI93707-01
Nitrite, High Range 0 to 150 mg/L (as NO2) 1 mg/L ±4 mg/L ±4% of reading Adaptation of the Ferrous Sulfate method 575 nm HI93708-01
Oxygen, Dissolved 0.0 to 10.0 mg/L (as O2 ) 0.1 mg/L ±0.4 mg/L ±3% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Azide modified Winkler method 420 nm HI93732-01
Oxygen Scavengers (Carbohydrazide) 0.00 to 1.50 mg/L (as Carbohydrazide) 0.01 mg/L ±0.02 mg/L ±3% of reading Adaptation of the iron reduction method 575 nm HI96773-01
Oxygen Scavengers (Diethylhydroxylamine)(DEHA) 0 to 1000 µg/L (as DEHA) 1 µg/L ±5 µg/L ±5% of reading Adaptation of the iron reduction method 575 nm HI96773-01
Oxygen Scavengers (Hydroquinone) 0.00 to 2.50 mg/L (as Hydroquinone) 0.01 mg/L ±0.04 mg/L ±3% of reading Adaptation of the iron reduction method 575 nm HI96773-01
Oxygen Scavengers (Iso-ascorbic Acid) 0.00 to 4.50 mg/L (as Iso-ascorbic acid) 0.01 mg/L ±0.03 mg/L ±3 % of reading Adaptation of the iron reduction method 575 nm HI96773-01
Ozone 0.00 to 2.00 mg/L (as O3 ) 0.01 mg/L ±0.02 mg/L ±3% of reading Colorimetric DPD Method 525 nm HI93757-01
pH 6.5 to 8.5 pH 0.1 pH ±0.1 pH Adaptation of the Phenol Red method 525 nm HI93710-01
Phosphate, Marine Ultr Low Range 0 to 200 µg/L (as P) 1 µg/L ±5 µg/L ±5% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 20th edition, Ascorbic Acid method 610 nm HI736-25
Phosphate, Low Range 0.00 to 2.50 mg/L (as PO4 3-) 0.01 mg/L ±0.04 mg/L ±4% of reading Adaptation of the Ascorbic Acid method 610 nm HI93713-01
Phosphate, High Range 0.0 to 30.0 mg/L (as PO4 3-) 0.1 mg/L ±1.0 mg/L ±4% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Amino Acid method 525 nm HI93717-01
Potassium 0.0 to 20.0 mg/L (as K) 0.1 mg/L ±3.0 mg/L ±7% of reading Adaptation of the Turbidimetric Tetraphenylborate method 466 nm HI93750-01
Silica, Low Range 0.00 to 2.00 mg/L (as SiO2 ) 0.01 mg/L ±0.03 mg/L ±3% of reading Adaptation of the ASTM Manual of Water and Environmental Technology, D859, Heteropoly Molybdenum Blue method 610 nm HI93705-01
Silica, High Range 0 to 200 mg/L (as SiO2 ) 1 mg/L ±1 mg/L ±5% of reading Adaptation of the USEPA Method 370.1 for drinking, surface and saline waters, domestic and industrial wastes and Standard Method 4500-SiO2 466 nm HI96770-01
Silver 0.000 to 1.000 mg/L (as Ag) 0.001 mg/L ±0.020 mg/L ±5% of reading Adaptation of the PAN method 575 nm HI93737-01
Sulfate 0 to 150 mg/L (as SO42-) 1 mg/L ±5 mg/L ±3% of reading Sulfate is precipitated with barium chloride crystals 466 nm HI93751-01
Surfactants, Anionic 0.00 to 3.50 mg/L (as SDBS) 0.01 mg/L ±0.04 mg/L ±3% of reading Adaptation of the USEPA method 425.1 and Standard Methods for the Examination of Water and Wastewater, 20th edition, 5540C, Anionic Surfactants as MBAS 610 nm HI95769-01
Zinc 0.00 to 3.00 mg/L (as Zn) 0.01 mg/L ±0.03 mg/L ±3% of reading Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Zincon method 575 nm HI93731-01

مشخصات فنی HI83300

دقت طول موج ±1 nm
منبع نور پنج LED با فیلتر های تداخلی باریک 420، 466، 525، 575، 610 نانومتری
پهنای باند طیفی 8 نانومتر
کانال های ورودی یک ورودی الکترود pH و پنج طول موج فتومتر
الکترود pH الکترود pH دیجیتالی (به صورت جداگانه عرضه می شود.)
ثبت اطلاعات log on demand with user name and sample ID optional input
حافظه ی ثبت 1000 داده
اتصال USB-A host for flash drive; micro-USB-B for power and computer connectivity
GLP اطلاعات کالیبراسیون برای الکترود pH متصل
نمایشگر LCD 68 ×128 پیکسلی با نور پس زمینه
نوع و عمر باتری باتری قابل شارژ 3.7 VDC Li-polymer / 500 اندازه گیری فتومتری و 50 ساعت استفاده مستمر در اندازه گیری pH
Power Supply 5 VDC USB 2.0 power adapter with USB-A to micro-USB-B cable (included)
محیط 0 to 50.0 oC (32 to 122.0 oF); 0 to 95% RH, non-condensing
وزن 1 کیلوگرم (2.2 پوند)
ابعاد mm 97×177×206 (3.8×7.0×8.1 اینچ)
شاخص نور کالری متر / فتومتر شاخص نور سیلیکونی
نوع کووت دایره ای، 24.6 میلی متر
تعداد روش ها ماکزیمم 128
اطلاعات سفارش HI83214 همراه با موارد زیر ارائه می شود: 4 کووت نمونه و کلاهک، پارچه برای تمیز کردن کووت ها، کابل اتصال USB به  micro USB، آداپتور و کتابچه راهنما

نقد و بررسی‌ها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین کسی باشید که دیدگاهی می نویسد “فتومتر رومیزی HI83300”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *